Dear Atari Community!


We are happy to announce a new public release of EmuTOS:

EmuTOS 1.0 -- September 1, 2020



INTRODUCTION

EmuTOS is a single-user single-tasking operating system for 32-bit Atari
computers, clones and emulators. It can be used as a replacement for the
TOS images typically needed by emulators and can also run on some real
hardware, including the Atari ST(e), TT, and Falcon, and the FireBee. It
can even run on non-Atari hardware such as Amiga and ColdFire Evaluation
Boards. All the source code is open and free, licensed under the GNU
General Public License (GPL).



CHANGES SINCE RELEASE 0.9.4

For a quick summary of changes by release since release 0.9.4, please
refer to doc/changelog.txt.

For a detailed list of all changes since the project started, refer to
the Git repository.



DESCRIPTION

EmuTOS is basically made up of the following:

- The BIOS, which is the basic input output system
- The XBIOS, which provides the interface to the hardware
- The BDOS, which are the high level OS routines, often known as GEMDOS
- The VDI, the virtual device interface, i.e. the screen driver
- The AES, the application environment services or window manager
- The EmuDesk desktop, which is the graphical shell to the user
- EmuCON2, the command-line interpreter

The BIOS and XBIOS code is our own development. It is written from
scratch and implements all relevant TOS 3 BIOS & XBIOS functionality,
and a bit more, e.g. hard disk access. See doc/status.txt for details.

The GEMDOS part is based on Digital Research's GEMDOS sources, which were
made available under GPL license in 1999 by Caldera.

The graphical parts like VDI and AES are now more or less fully
implemented up to TOS v1.04 level. They work in all the graphics modes
of the original Atari ST, with some extensions. For example, systems with
VIDEL support 256 colours and 640x480 screen resolution. Some emulators
can patch EmuTOS to work with much bigger screen resolutions.

The desktop is now pretty much the same as the one in TOS 2 or higher
(although it is not fully implemented in the 192K ROMs for space reasons).
Of course you are always free to use a more advanced desktop replacement
like TeraDesk.

EmuCON2 is a basic but useful command-line interpreter, written from scratch
by Roger Burrows in 2013 to replace the original CLI.

Since EmuTOS just implements TOS functionality, you might want to use
MiNT on top of it in order to run more modern software. EmuTOS is not
an alternative to MiNT, but it's the only free base OS to boot MiNT.



EMULATION AND FUTURE PLATFORMS

EmuTOS and MiNT cooperate well. Both can utilize the Native Features
(NatFeats) interface for emulators:
    https://github.com/aranym/aranym/wiki/natfeats-about

EmuTOS uses this new standard interface for all the relevant native
functions supported by an emulator on which it's running. This interface
proxies the calls to the underlying host OS so that these features don't
need to be emulated. This is both faster and can provide features that
would be infeasible on a real machine. It may allow using modern graphics
cards, provide fast native filesystem access and enable you to use
networking with all bells and whistles - and many other things you might
not have even dreamed of.

The ARAnyM emulator has the most extensive support for NatFeats.
The Hatari emulator supports the basic NatFeats facilities.



HARDWARE

Making EmuTOS run natively on a new hardware platform is more or less just
a question of driver support for EmuTOS. The same for MiNT, if you'd like
to have it running on top of EmuTOS.

This is the currently supported original Atari hardware:
- CPU support for M68000, M68030
- FPU detection
- 68030 MMU and cache
- Memory controller (both ST and Falcon)
- TT-RAM
- Monitor type detection (mono, RGB or VGA)
- DMA controller
- WD 1772 / AJAX Floppy disk controller
- MFP, MFP #2
- PSG
- ST shifter
- STe shifter
- TT shifter
- VIDEL
- ACIAs, IKBD protocol, mouse
- MegaST Real-Time Clock (set clock not tested)
- NVRAM (including RTC)
- Blitter
- Microwire
- SCC
- IDE
- SCSI
- ACSI

EmuTOS also supports the following Atari-compatible hardware:
- CPU support for M68010, M68020, M68040, M68060, ColdFire V4e, and Apollo 68080
- ICD AdSCSI Plus ST Real-Time Clock
- MonSTer expansion card
- Magnum ST/STe expansion cards
- Storm ST expansion card (RAM and RTC)
- Nova/ET4000 graphics card
- Nova/Mach32 graphics card
- Volksfarben/ET4000 graphics card
- Wittich Imagine for the MegaST/ET4000 graphics card
- SD/MMC
- The Native Features interface to some degree

Currently unsupported hardware features:
- DSP

EmuTOS is also available on some non-Atari hardware:
- Amiga (floppy or ROM for any Amiga, including MapROM support)
- ColdFire Evaluation Boards (M5484LITE, M5485EVB)
- Vampire v4 standalone board



AVAILABILITY

The EmuTOS home page is:

    https://emutos.sourceforge.io/

The project home is on SourceForge:

    https://sourceforge.net/projects/emutos/

The latest releases can be downloaded from:

    https://sourceforge.net/projects/emutos/files/emutos/

Development snapshots allow you to test the current development progress:

    https://sourceforge.net/projects/emutos/files/snapshots/

The latest sources are always available on GitHub:

    https://github.com/emutos/emutos

If you are just curious or would like to help us develop this nice little
OS, you are invited to subscribe to our mailing list for developers at:

    https://lists.sourceforge.net/lists/listinfo/emutos-devel


We hope that you like EmuTOS. If you have any suggestions or comments, we
always appreciate hearing both the good and the bad things about it.


The EmuTOS development team.

-- 
Originally written by Martin Doering
https://emutos.sourceforge.io/
